Highlight Features
- Enterprise-class indoor 802.11ax Wi-Fi 6 wireless access point.
-
Support IEEE 802.11a, IEEE 802.11b, IEEE 802.11g,
IEEE 802.11n, IEEE 802.11ac & IEEE 802.11ax, IEEE 802.3az - PoE Power IEEE 802.3at (PoE+) or better
- IPv4 & IPv6 Support
-
Interfaces 1 x RJ-45 10/100/1000/2500 Mbps Multi Gigabit Ethernet Port,
1x RJ45 console port, Hardware Reset Button
Models
AIR-AP610C-AX
Series
WLAN APS & ACCESS CONTROLLERS
AIR-AP610C-AX
PRODUCT OVERVIEW
What This Product Does
AIR-AP610C-AX is a dual-band high-performance gigabit wireless access point device based on the 802.11ax standard launched by AirPro, it could offer maximum 3000Mbps access rate. AIR-AP610C-AX works in the 2.4GHz and 5GHz frequency bands and supports advanced wireless technologies such as MU-MIMO, OFDMA, spatial multiplexing, and TWT. The first radioof AIR-AP610C-AX works in the 2.4GHz frequency band and can provide a maximum access rate of 600Mbps; the second radio works in the 5GHz frequency band and can provide a maximum access rate of up to 2400Mbps.
Enterprise-class indoor 802.11ax Wi-Fi 6 wireless access point:-
AIR-AP610C-AX supports the 802.11ax standard, operates in both 2.4 GHz and 5 GHz band, and provides an access bandwidth up to 3000 Mbps. This model is the best choice for Entry-level office or company as it can support concurrent users up to 300+.
Wireless user management at a fine granularity:-
AIR-AP610C-AX can support a maximum of 32 WLANs to implement multi-layer multi-service management of wireless users at a fine granularity. Each WLAN supports access control and uplink/downlink rate limit based on MAC or IP addresses. These WLANs may be bound to virtual local area networks (VLANs).
Flexible installation:-
AIR-AP610C-AX supports wall mounting, ceiling mounting, T-keel mounting, you can deploy it almost everywhere that you want.
Anti-thief:-
AIR-AP610C-AX can work with Kensington technology to protect the investment of customers, which is very important to the specific customer.
Good PoE compatibility:-
AIR-AP610C-AX can work well with all PoE switch(cisco, HUAWEI, juniper, etc.) which support 802.3af & at standard, this allows to power up AIR-AP610C-AX directly, a power adapter is not required anymore.
Dual-mode fit & fat:-
AIR-AP610C-AX can work in fit or fat mode and can flexibly switch between the fit mode and the fat mode according to network planning requirements.
AIR-AP610C-AX
PRODUCT SPECIFICATIONS
| Features | AIR-AP610C-AX |
|---|---|
|
Feature/Description |
3Gbps Dual Band 11ax High Power Ceiling Mount AP |
|
No. of Port |
1*WAN PoE*100/1000/2.5G PoE/1*LAN*1WAN PoE 100/1000/2.5G/1 Console Port |
|
Power |
12V DC/1.5Amp Or PoE at |
|
Radio Chain Streams |
4x4 |
|
Antenna Gain |
4*5dbi |
|
Maximum PHY Rate |
600Mbps on 2.4Ghz & 2.4Gbps on 5Ghz |
|
NAT/Bridge |
Yes |
|
Multiple SSID |
Up to 32 |
|
Concurrent User |
Up to 300 |
|
SSID based VLAN |
Yes |
|
Management VLAN |
Yes |
|
Band Steering |
Yes |
|
Wi-Fi Roaming |
Yes |
|
Management |
Private Cloud / Hardware Controller |
|
WIDS |
Yes |
|
Rouge AP |
Yes |
|
802.1X Authentication |
Yes |
