Highlight Features
- 802.11ax Wi-Fi 6 wireless in-wall access point
- Wired and wireless gigabit access
- Easy to deploy x86 standard panel
- Downlink Port
- Good PoE compatibility
- Multi-mode: fit, fat, bridge
Models
AIR-WAP610-AX
Series
IN-WALL AP
AIR-WAP610-AX
PRODUCT OVERVIEW
What This Product Does:-
AIR-WAP610-AX is a dual band high-performance gigabit wireless access point based on the 802.11ax standard. supports standard 86 panel for easy installation and offers upto 2976Mbps access rate. It works in 2.4GHz and 5GHz frequency bands and supports advanced wireless technologies such as MU-MIMO, OFDMA, spatial multiplexing and TWT. The first radio works in the 2.4GHz frequency band and can provide access rate of up to 574Mbps; the second radio works in the 5GHz frequency band and can provide accessrate of upto 2402Mbps.
AIR-WAP610-AX supports the 802.11ax standard, operates in both 2.4 GHz and 5 GHz band, and provides an access rate upto 2976 Mbps. This model is a high-end in-wall access point for hotel, education, government and business networks.
AIR-WAP610-AX has an integrated gigabit wired uplink port which can truly meet the wireless band width requirement of clients. It also has four-gigabit downlink Ethernet ports which support flexible VLAN configuration so that the wired and wireless traffic can be logically separated.
AIR-WAP610-AX can work well with all PoE switches (viz. Cisco, HUAWEI, Juniper, etc.) which support 802.3af/at standard. This allows AIR-WAP610-AX to power up directly without any power adapter.
AIR-WAP610-AX can provide 4 Gigabit downlink ports that allow the customer to connect the terminals which do not support Wi-Fi, and provides more stable connections. Easy to deploy x86 standard panel:- AIR-WAP610-AX panel supports 86 box standard, and can perfectly be installed on any standard panel. With the use of the PoE cable, the whole installation is low cost, silent and quick (the time to install an AP is less than 3 minutes).
AIR-WAP610-AX can work in fit, fat or bridge mode and can flexibly switch between these three modes according to network planning requirements.
AIR-WAP610-AX
PRODUCT SPECIFICATIONS
| Features | 3Gbps Dual Band 11ax Wi-Fi6 In-Wall AP |
|---|---|
|
Feature/Description |
1*WAN PoE 10/100/1000Mbps + 4*LAN*10/100/1000 Mbps with BLE |
|
No. of Port |
1WAN PoE -10/100/1000Mbps + 4LAN*10/100/1000 Mbps with 1 Passthrough Port |
|
Power |
PoE af |
|
Radio Chain Streams |
2x2 |
|
Antenna Gain |
4*3dbi |
|
Maximum PHY Rate |
3Gbps- 575Mbps on 2.4Ghz & 1.2Gbps on 5Ghz |
|
NAT/Bridge |
Yes |
|
Multiple SSID |
Up to 32 |
|
Concurrent User |
128 |
|
SSID based VLAN |
Yes |
|
Management VLAN |
Yes |
|
Band Steering |
Yes |
|
Wi-Fi Roaming |
Yes |
|
Management |
Hardware controller/Private Cloud |
