Highlight Features
- Comply with IEEE 802.11ac/b/g/n, dual-band.
- 1200Mbps Data Rate, 2×2 MIMO Technology.
- 1*100Mbps WAN Port, 1*100bps LAN Port, faster Ethernet.
- Support active IEEE 802.3af 48V PoE standard.
- Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz).
- Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP operation mode in FAT AP.
- With the function of the built-in firewall, IP filter, URL filter, and MAC filter.
- Comply with IEEE 802.3az standard, RF power adjustment, and frequency analyzer for better application in different environments.
Models
AP-WAC2100-V1
Series
WLAN APS & ACCESS CONTROLLERS
AP-WAC2100-V1
PRODUCT OVERVIEW
What This Product Does:-
AP-WAC2100-V1 is an 11ac Wi-Fi standard Realtek Chipset high power Ceiling Wireless Access Point support 11ac combined 1200Mbps Wi-Fi speed over 2.4GHz (300Mbps) and 5GHz (900Mbps), Gigabit WAN port, make more wireless users can access into it. It is an economic option for hotels, schools, restaurants, or other enterprise places.
FIT/FAT Operation Mode :-
- – AP-WAC2100-V1 support FIT/FAT operation mode.
- – FIT AP mode works with the AC controller, plug and play, central management by AC controller, mostly for enterprise application.
- – FAT AP mode supports AP, repeater, gateway, WISP operation mode, can be configured by GUI, suits for home mostly.
MU-MIMO Technology :-
With MIMO technology, it adopts 256QAM modulation, supports MU-MIMO (Multi-User Multiple-Input Multiple-Output), 2 Spatial steams greatly improves communication efficiency.
Power over Ethernet :-
– AP-WAC2100-V1 has integrated IEEE802.3af Power over Ethernet (PoE), for easy installation and lower cost.
– So, it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Zero Configurations :-
– Supports FIT/FAT AP together, works with Airpro WLAN Controller, configures IP address, ESSID, Channel, Password, upgrade firmware, backup, and restore.
– WLAN controller is easy for administrator access to do remote monitoring/management at any time and any place makes this AP and WLAN controller more professional and cost-effective in Wi-Fi Projects.
AP-WAC2100-V1
PRODUCT SPECIFICATIONS
| Features | AP-WAC2100-V1 |
|---|---|
|
Feature/Description |
Dual Band 11ac Ceiling Mount AP |
|
No. of Port |
1WAN PoE -10/100Mbps / 1LAN*10/100Mbps |
|
Power |
12V DC/1Amp Or af PoE |
|
Radio Chain Streams |
2x2 |
|
Antenna Gain |
4*5dbi |
|
Maximum PHY Rate |
300Mbps on 2.4Ghz and 900Mbps on 5Ghz |
|
NAT/Bridge |
Yes |
|
Multiple SSID |
Up to 8 |
|
Concurrent User |
Up to 80 |
|
SSID based VLAN |
Yes |
|
Management VLAN |
Yes |
|
Band Steering |
Yes |
|
Wi-Fi Roaming |
Yes |
|
Management |
Hardware Controller |
