Highlight Features
- 802.11ax Wi-Fi 6 wireless access point
- Wired and wireless gigabit access
- Gigabit LAN PoE Out
- Multiple Gigabit downlink ports
- Easy to deploy x86 standard panel
- Dual-mode fit&fat
Models
AIR-WAP605AX-R2
Series
IN-WALL AP
AIR-WAP605AX-R2
PRODUCT OVERVIEW
What This Product Does:-
AIR-WAP605AX-R2 is a dual-band high-performance gigabit wireless access point device based on the 802.11ax standard launched by AirPro, it could offer maximum 2.97Gbps access rate, and supports standard panel for easy installation. AIR-WAP605AX-R2 works in the 2.4GHz and 5GHz frequency bands and supports advanced wireless technologies such as MU-MIMO, OFDMA, spatial multiplexing, and TWT. The first radio works in the 2.4GHz frequency band and can provide a maximum access rate of 575Mbps; the second radio works in the 5GHz frequency band and can provide a maximum access rate of up to 2400Mbps.
802.11ax Wi-Fi 6 wireless access point:-
AIR-WAP605AX-R2 supports the 802.11ax standard, operates in both 2.4 GHz and 5 GHz band, and provides an access bandwidth up to 3000 Mbps. This model is a high-end in-wall access point for hotel, education, government and business networks.
Wired and wireless gigabit access:-
AIR-WAP605AX-R2 integrated gigabit wired uplink port, can truly meet the bandwidth requirement of wireless clients and four-gigabit (1Port PoE Out) downlink Ethernet ports which support flexible VLAN configuration, the wired and wireless traffic can be logically separated.
Gigabit LAN PoE Out:-
AIR-WAP605AX-R2 can provide the 1 Gigabit PoE LAN port to power on external device like IP Phone (VOIP) etc.
Multiple Gigabit downlink ports :-
AIR-WAP605AX-R2 can provide 4 Gigabit downlink ports that allow the customer to connect the terminals, which do not support Wi-Fi, and provide more stable connections.
Easy to deploy x86 standard panel :-
AIR-WAP605AX-R2 panel supports 86 box standards, and can perfectly fit plug-in installed to any standard panel, With the use of the PoE cable, the whole installation will be low cost, no noise, short period (the time to install an AP is less than 3 minutes).
Dual-mode fit&fat:-
AIR-WAP605AX-R2 can work in fit or fat mode and can flexibly switch between the fit mode and the fat mode according to network planning requirements.
AIR-WAP605AX-R2
PRODUCT SPECIFICATIONS
| Features | AIR-WAP605AX-R2 |
|---|---|
|
Feature/Description |
High Power Enterprise Grade Inwall AP with 1WAN PoE, 4LAN, 1 LAN PoE Out |
|
Uplink Port |
1*1000M Ethernet uplink port |
|
Downlink ports |
4* 10/100/1000M ports, 1* 10/100/1000M PoE Out |
|
Power Supply |
802.3af & at and External power adapter (Input: 100~240V AC , Output: 12 V DC) |
|
Maximum power consumption |
<12W |
|
RF port |
Built-in 2.4 GHz 3 dBi antenna and 5 GHz 3 dBi antenna |
|
Power adjustment granularity |
1 dBm |
|
Product positioning |
In-wall dual-frequency |
|
Working frequency band |
2.4GHz and 5GHz |
|
andwidth performance |
3000Mbps |
|
Virtual AP (BSSID) |
32 |
|
Concurrent user |
254 |
|
Number of spatial streams |
2.4GHz:2, 5GHz:2 |
